CCNA 200-120 Study Guide
- Chapter 1 – Understanding Networks and their Building Blocks
- Chapter 2 – IP Addressing and Subnets
- Chapter 3 Introduction to Cisco Routers, Switches and IOS
- 3-1 Introduction to Cisco Routers, Switches, IOS & the Boot Process
- 3-2 Using the Command-Line Interface (CLI)
- 3-3 Basic Configuration of Router and Switches
- 3-4 Configuring Router Interfaces
- 3-5 Gathering Information and Verifying Configuration
- 3-6 Configuring DNS & DHCP
- 3-7 Saving, Erasing, Restoring and Backing up Configuration & IOS File
- 3-8 Password Recovery on a Cisco Router
- 3-9 Cisco Discovery Protocol (CDP)
- 3-10 Using Telnet on IOS
- 3-11 CCNA Lab #1
- Chapter 4 Introduction to IP Routing
- 4-1 Understanding IP Routing
- 4-2 Static, Default and Dynamic Routing
- 4-3 Administrative Distance and Routing Metrics
- 4-4 Classes of Routing Protocols
- 4-5 Routing Loops
- 4-6 Route Redistribution
- 4-7 Static and Default Route Lab
- Chapter 5 Routing Protocols
- 5-1 RIPv1 & RIPv2
- 5-2 Configuring RIPv1 & RIPv2
- 5-3 Verifying and Troubleshooting RIP
- 5-4 Enhanced Interior Gateway Routing Protocol (EIGRP)
- 5-5 Configuring EIGRP
- 5-6 Verifying and Troubleshooting EIGRP
- 5-7 Open Shortest Path First (OSPF)
- 5-8 Configuring OSPF
- 5-9 Verifying and Troubleshooting OSPF
- 5-10 EIGRP and OSPF Summary & Redistribution Routes
- 5-11 Lab 5-1: RIP
- 5-12 Lab 5-2: EIGRP
- 5-13 Lab 5-3: OSPF
- Chapter 6 Switching and Spanning Tree Protocol
- 6-1 Understanding Switching and Switches
- 6-2 Initial Configuration of a Catalyst Switch
- 6-3 Spanning Tree Protocol (STP)
- 6-4 Cisco’s additions to STP (Portfast, BPDUGuard, BPDUFilter, UplinkFast, BackboneFast)
- 6-5 Rapid Spanning Tree Protocol (RSTP) – 802.1w
- 6-6 Per-VLAN Spanning Tree Plus (PVST+) and Per-VLAN RSTP (Rapid-PVST)
- 6-7 EtherChannel
- 6-8 Lab 6-1 – Port Security
- 6-9 Lab 6-2 – STP
- Chapter 7 VLANs and VTP
- 7-1 MAC Address Table
- 7-2 Virtual LANs (VLANs)
- 7-3 Types of Switch Ports
- 7-4 VLAN Trunking: ISL and 802.1Q
- 7-5 VLAN Trunking Protocol (VTP)
- 7-6 Inter-VLAN Routing
- 7-7 VLAN Configuration
- 7-8 Inter-VLAN Routing Configuration
- 7-9 VTP Troubleshooting
- 7-10 Voice VLAN Configuration
- Chapter 8 – Network Security
- 8-1 Network Security
- 8-2 Cisco Firewalls
- 8-3 Layer 2 Security
- 8-4 AAA Security Services
- 8-5 Secure Device Management
- 8-6 Secure Communications
- Chapter 9 – Access Lists
- 9-1 Introduction to Access Lists
- 9-2 Standard Access Lists
- 9-3 Extended Access Lists
- 9-4 Access Lists -Remote Access, Switch Port, Modifying & Helpful Hints
- 9-5 Cisco Configuration Professional Initial Setup and Access List Lab
- Chapter 10 – Network Address Translation (NAT)
- 10-1 Introduction to NAT
- 10-2 Static NAT Configuration & Verification
- 10-3 Dynamic NAT Configuration
- 10-4 NAT Overloading aka Port Address Translation (PAT)
- 10-5 NAT Troubleshooting
- 10-6 NAT Configuration with Cisco Configuration Professional
- Chapter 11 – Wide Area Networks
- 11-1 Introduction to Wide-Area Networks
- 11-2 Point-to-Point WANs: Layer 1
- 11-3 Point-to-Point WANs: Layer 2
- 11-4 PPP Concepts
- 11-5 PPP Configuration
- 11-6 Troubleshooting Serial Links
- 11-7 Frame Relay
- 11-8 LMI and Encapsulation Types
- 11-9 Frame Relay Congestion Control
- 11-10 Frame Relay Encapsulation
- 11-11 Frame Relay Addressing
- 11-12 Frame-Relay Topology Approaches
- 11-13 Frame Relay Configuration
- 11-14 Other WAN Technologies
- Chapter 12 – Virtual Private Networks
- 12-1 VPN Concepts
- 12-2 Types of VPN
- 12-3 Encryption
- 12-4 IPsec VPNs
- 12-5 SSL VPNs & Tunneling Protocols
- 12-6 GRE Tunnels
- 12-7 VPN Summary
- Chapter 13 – IPv6
- 13-1 IPv6 Introduction
- 13-2 IPv6 Address Configuration
- 13-3 OSPF Version 3
- 13-4 EIGRP for IPv6
- 13-5 Summary
- Chapter 14 – IP Services
- 14-1 High Availability – VRRP, HSRP, GLBP
- 14-2 Cisco IOS NetFlow
- 14-3 Summary
